|
|
|
|
|

-------------------------------------------
SpectraPure® Single Tank Liquid Replenishers are the most advanced means of controlling liquid levels on single reservoirs, and are ideal for replenishing evaporate water in aquariums or liquids in other constant level containers. An onboard air pressure activated electrical switch opens a solenoid valve when the liquid level drops approximately 1" and closes it when the liquid level rises back to its original level.
Research at SpectraPure® shows that the Single Tank Liquid Replenisher provides a significant advantage over conventional float and back-pressure activated automatic shut-off valves by maximizing the duration of membrane operation. This minimizes the build up of impurities due to membrane creep (the small amount of impure water that is a characteristic of the membrane at the onset of pure water production).
All wetted components are constructed of inert and saltwater safe materials. Power is provided by a plug-in 24 volt AC (UL listed and CSA approved) transformer. The single reservoir model comes with the controller, which includes a switched 24 volts AC outlet for controlling a booster pump or other 24 volt AC operated devices, compression fittings, and 5 feet of tubing for remote mounting of the sensor.
------------------------------------------------------
SpectraPure® Ultra-Precise ATO holds your tank’s salinity constant while adding replacement water or Kalc in small doses. The pump can operate in either “fill mode” or “drain mode” when the water level changes. The Sensor Tube can be pre-set to operate with a minimal (0.1") change in water level up to a 4" difference. This calibration is saved even after a loss of power.
The pump used in the Ultra-Precise ATO is the same pump that is in the LiterMeter III™ , the leader in aquatic dosing for over 10 years. Now with our new improved, long life Peristaltic tubing and Gen6 design. This is the quietist, most reliable Peristaltic Pump ever made.
|
|
|
MODEL
|
DESCRIPTION
|
RETAIL
|
SALE
PRICE
|
QTY
|
|
LLC-S-115 |
LLC-S-115 LIQUID LEVEL CONTROLLER |
$99.00 |
|
|
|
LLC-UPLC-II |
UPLC-II AUTO TOP-OFF CONTROLLER |
$240.00
|
$199 |
|
|
|
|

SpectraPure® MaxCap® RO/DI Systems incorporate a high-silicate removal TFC membrane and 0.5 micron MicroTec™ Sediment Filter and Carbon Block Filter. Used in combination with our MaxCap® DI and SILICABUSTER silica-removal deionizing cartridges, this system provides the ultimate removal of algae promoting substances, including colloidal silica, and the longest deionizing cartridge life, significantly reducing the cost of operation. This incredible break-through in DI cartridge technology will reduce your costs to produce DI water by over 50%.
|
|
|
MODEL |
DESCRIPTION |
RETAIL |
SALE PRICE |
QTY |
|
MC-RODI-90-10 |
90 Gallon Per Day MaxCap RO/DI System |
$349.99
|
|
|
|
|
| |
|
|
|
SpectraPure® CSP-DI Systems incorporate a high-silicate removal TFC membrane and 0.5 micron MicroTec™ Sediment Filter and Carbon Block Filter. CSPDI™ Systems are available from 25 gpd (95 LPD ) to 180 gpd (680 LPD) production rate. The pressure gauge allows for better visibility of system performance and indication of plugged pre-filters, plus a 33% larger capacity SilicaBuster™ 10" DI cartridge. This water purification system maximizes pure water production through the application of laboratory grade deionization resins used in our specialty deionization cartridges. The dual-probe TDS Meter monitors the output of the RO membrane, as well as the final DI water. You can be always be assured of "000 TDS" water. Also included is a filter wrench and a 3/4" garden hose adapter.
|
|
MODEL |
DESCRIPTION |
RETAIL |
SALE PRICE |
QTY |
|
|
CSPDI-90 |
90 Gallons per Day CSPDI-90 RO/DI System |
$249.99
|
|
|
|
|
|
|
|
| SpectraPure® CSP Systems incorporate a high-silicate removal TFC membrane and 0.5 micron MicroTec™ Sediment Filter and Carbon Block Filter. CSP™ Systems are available from 25 gpd (95 LPD )to 180 gpd (680 LPD) production rate. The pressure gauge allows for better visibility of system performance and indication of plugged pre-filters. The inline Dual-probe TDS Meter determines the performance of the RO membrane as well as the DI exhaustion point. |
|
MODEL |
DESCRIPTION |
RETAIL |
SALE PRICE |
QTY |
|
|
CSP-90 |
90 Gallons per Day CSP-90 RO/DI System |
$189.99
|
|
|
|
|
|
 . |
SpectraPure® Standard Membranes are treated with a proprietary process to enhance rejection and production rates and are QC batch-tested in insure rated performance within manufacturer tolerances. Membranes are rated at 60 psi and 77 degrees F. water temperature. |
|
|
|
.
No other membrane can match the SpectraSelect™ for
long life and the ability to remove silica phosphates,
nitrates, and heavy metals.
|
SpectraPure® SpectraSelect™ membranes are individually tested and hand picked for consistent ultra-high rejection that has the highest known rejection rate of all reverse osmosis membranes available. They are also treated with a proprietary process to enhance the rejection & production rates. SpectraSelect™ Membranes are standard equipment in our UHE RO/DI Systems. The SpectraSelect™ Ultra-High Rejection Membrane is also available as a replacement option for most Reverse Osmosis Systems. All 25 to 90 GPD membranes will fit in our standard membrane housing. |
|
|
|
* NOTE: Membranes must be matched with flow restrictors. Always change the flow restrictor when changing membrane size.
See Flow Restrictors. |
|
|
|
SpectraPure® Sediment Filters have the highest efficiency and dirt holding capacities to maximize downstream carbon filter and membrane life. |
|
|
MODEL
|
DESCRIPTION
|
RETAIL
|
SALE
PRICE
|
QTY
|
|
|
|
BEST
ZetaZorb™ 0.2 Micron Absolute Sediment Filter
|
$27
|
|
|
|
|
SF-MT-0.5-10
|
BETTER
0.5 Micron Sediment Pre-Filter
|
$17
|
$12
|
|
|
|
SF-MT-1-10
|
GOOD
1 Micron Sediment Pre-Filter
|
$9
|
$6
|
|
|
|
|
SpectraPure® High Quality Carbon Block Filters provide long life and high removal rates of chlorine and chemical contaminants. |
|
|
MODEL
|
DESCRIPTION
|
RETAIL
|
SALE
PRICE
|
QTY
|
|
|
CF-0.5-10
|
BEST
Ultra Hi Capacity, 0.5 Micron Carbon Pre-Filter
Treats 20,000 Gal of water @ 1 PPM Chlorine
|
|
$13
|
|
|
|
CF-1-10
|
BETTER
1.0 Micron Carbon Pre-Filter Treats 9,000 Gallons of water
@ 1 PPM Chlorine
|
$14
|
$10
|
|
|
|
CF-5-10
|
GOOD
5.0 Micron Carbon Pre-Filter Treats 6,000 Gallons of water
@ 1 PPM Chlorine
|
$9.50
|
$7
|
|
|
|
|
SpectraPure® Revolutionary MaxCap® DI Cartridge has over 3 times the capacity of Mixed-Bed or Hi-Silica removal deionizing cartridges. When placed upstream of your existing DI cartridge, the life of your downstream DI will increase by four times or more! The MaxCap® DI Cartridge removes phosphates, nitrates and ammonia that is found in water sources that contain chloramines. |
|
|
MODEL
|
DESCRIPTION
|
RETAIL
|
SALE
PRICE
|
QTY
|
|
|
|
MaxCap® Super Capacity DI Cartridge (Non Color Indicating)
|
$37
|
$27
|
|
|
|
|
SpectraPure® Deionizing Cartridges use only our highest quality resins that are optimized for maximum life and contaminant removal. All resins are quality tested and cartridges are sealed in aluminized plastic bags to seal out atmospheric carbon dioxide, which degrades resin quality. |
|
|
MODEL
|
DESCRIPTION
|
RETAIL
|
SALE
PRICE
|
QTY
|
|
|
DI-SB-10
|
Silica-Buster
DI Cartridge (Non Color Indicating)
|
$34
|
$18
|
|
|
|
DI-SB-CI-10
|
Color
Indicating Silica-Buster DI Cartridge
|
$33
|
$18
|
|
|
|
|
High
Performance Mixed-Bed DI Cartridge (Non Color Indicating)
|
$30
|
$18
|
|
|
|
DI-MB-CI-10
|
High
Performance Mixed-Bed DI Cartridge (Color Indicating)
|
$27
|
$18
|
|
|
|
DI-SF-CI-10
|
Silica-Free
DI Cartridge (Color Indicating)
|
$35
|
$18
|
|
|
|
DI-AR-CI-10
|
Chloramine
Removal DI Cartridge (Color Indicating)
|
$28
|
$18
|
|
|
|
 
|
|
Booster Pump Kits are available for manual use, automatic filling of reservoirs or sumps, and for use on RO Systems using pressurized holding tanks. Our pump kits include transformers for use on 115 volts AC/60 Hz.
Use low flow booster pump kits for systems up to 60 gpd, and high flow booster pump kits for systems up to 200 gpd.
Ideal for use on water sources with pressures below 40 psi (2.8 bar) such as private wells, gravity-fed water systems and high-rise apartments. |
|
MODEL
|
DESCRIPTION
|
RETAIL
|
SALE
PRICE
|
QTY
|
|
|
BPLF-MO-115
|
Low Flow Booster Pump Kit
|
$169
|
|
|
|
|
BPHF-MO-115
|
High
Flow Booster Pump Kit |
$199
|
$129
|
|
|
|
Automatic System Includes
Pump, Electronic Solenoid, Pressure Switch, Check Valve, and Heavy Duty Transformer
|
|
MODEL
|
DESCRIPTION
|
RETAIL
|
SALE
PRICE
|
QTY
|
|
|
BPLF-PS-093-115
|
Auto Booster Pump Kit, 60-100 GPD
|
$200
|
|
|
|
|
BPHF-PS-250/4-115
|
Auto Booster Pump Kit, 100-200 GPD
|
$229
|
$175
|
|
|
|
|
|
| |
SpectraPure
Website
For
any additional information on the listed sale items or to obtain your
copy of
SpectraPure's 2009
Retail Catalog, please contact our sales department
at:
480-894-5437 Toll Free 800-685-2783
Fax 480-894-6109 Fax
Toll Free 877-527-7873
Email: sales@spectrapure.com
We look forward to hearing from you!
|
|
|
| |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |