|
|
OUT OF STOCK!
REPLACEMENT FILTERS FOR MAXCAP® UHE 400
|
SEDIMENT FILTER (SF-ZZ-0.2-20)
CARBON BLOCK (CF-0.5-20)
RO MEMBRANE (MEM-0300)
1ST DI CARTRIDGE (DI-MC-20)
2ND DI CARTRIDGE (DI-SB-20)
|
Our NEW MaxCap® UHE™ (Ultra-High Efficiency 5-Stage) system has been designed to conserve one of our most precious resources... water. We have miniaturized the technology used in our commercial PSP systems to achieve an incredible 1/1 (or better) ratio in a Micro-Processor controlled system small enough to fit under your sink! The new MaxCap® UHE™ also uses our field proven MaxCap® technology to produce Ultra-Pure DI water at half the cost of other systems. This system produces 400 Gallons Per Day! |
|
|
|
REPLACEMENT FILTERS FOR
MAXCAP® UHE 100 |
SEDIMENT FILTER (SF-ZZ-0.2-10)
CARBON BLOCK (CF-0.5-10)
RO MEMBRANE (MEM-0090)
1ST DI CARTRIDGE (DI-MC-10)
2ND DI CARTRIDGE (DI-SB-10)
|
Our NEW MaxCap® UHE™ (Ultra-High Efficiency 5-Stage) system has been designed to conserve one of our most precious resources... water. We have miniaturized the technology used in our commercial PSP systems to achieve an incredible 1/1 (or better) ratio in a Micro-Processor controlled system small enough to fit under your sink! The new MaxCap® UHE™ also uses our field proven MaxCap® technology to produce Ultra-Pure DI water at half the cost of other systems. This system produces 100 Gallons Per Day! |
|
|
|
REPLACEMENT FILTERS FOR MAXCAP® |
SEDIMENT FILTER (SF-MT-0.5-10)
CARBON BLOCK (CF-0.5-10)
RO MEMBRANE (MEM-0090)
1ST DI CARTRIDGE (DI-MC-10)
2ND DI CARTRIDGE (DI-SB-10)
|
SpectraPure® MAXCAP® RO/DI™ Systems incorporate high-flow high-rejection TFC membranes (90 GPD @ 60 psi & 77 degF) that have the highest rejection available. Used in combination with our MaxCap® DI™ and silica-removal deionizing cartridges, this system provides the ultimate removal of algae promoting substances, including colloidal silica, and the longest deionizing cartridge life, significantly reducing the cost of operation. This is water purification at its best, an RO/DI system designed to continuously produce economical ultra-pure water. |
|
|
|
REPLACEMENT FILTERS FOR CSPDI |
SEDIMENT FILTER (SF-MT-0.5-10)
CARBON BLOCK (CF-0.5-10)
RO MEMBRANE (MEM-0025 to MEM-0090)*
DI CARTRIDGE (DI-SB-10)
|
SpectraPure ® CSP-DI Systems incorporate high-flow high-rejection TFC membranes, a 0.5 micron sediment filter and carbon block filter, plus a 33% higher capacity SilicaBuster™ 10" DI cartridge. The standard pressure gauge and clear filter housings mean better visibility to system performance. A dual-probe TDS Meter monitors membrane and DI performance. Also included is a filter wrench and a 3/4" garden hose adapter. |
|
|
|
REPLACEMENT FILTERS FOR MaxPure™ MPDI |
SEDIMENT FILTER (SF-MT-0.5-10)
CARBON BLOCK (CF-0.5-10)
RO MEMBRANE (MEM-0025 to MEM-0090)*
DI CARTRIDGE (DI-SB-CI-10)
|
SpectraPure ® MaxPure™ MPDI Systems incorporate high-flow high-rejection TFC membranes, a 0.5 micron sediment filter and carbon block filter, and a custom formulated 10"color-change DI cartridge. MPDI systems are available from 25 to 180 GPD (95 to 680 LPD) production rate, and come with a 3/4" garden hose adapter. |
|
|
* MOST COMMONLY USED FOR SALT WATER AQUARIUMS AND LABORATORY *
|
