SpectraPure® REPLACEMENT MEMBRANES AND FLOW RESTRICTORS
IMPORTANT INFORMATION: Purchase an RO membrane when needed. If you would like to keep one on hand, you can store it in the refrigerator
for up to 1 year. (Keep in its sealed, original packaging). If the membrane dries out, it will not produce water.)

 

 


SpectraSelect™ Ultra-High Rejection RO Membranes

No other membrane can match the SpectraSelect™ for long life and the ability to remove silica phosphates, nitrates, and heavy metals. SpectraPure® SpectraSelect™ membranes are individually tested and hand picked for consistent ultra-high rejection that has the highest known rejection rate of all reverse osmosis membranes available. They are also treated with a proprietary process to enhance the rejection & production rates. SpectraSelect™ Membranes are standard equipment in our Deluxe Reverse Osmosis and RO/DI Systems. The SpectraSelect™ Ultra-High Rejection Membrane is also available as a replacement option for most Reverse Osmosis Systems. All 25 to 90 GPD membranes will fit in our standard membrane housing.

  • Guaranteed minimum 98% rejection or better.
  • Membranes produce rated GPD ± 10% at 60 psi. (Permeate flow and salt rejection based on the following test conditions: 250 ppm, 77°F (25°C), 15% recovery and the specified applied pressure).
  • Membranes must be matched with flow restrictors. Always change the flow restrictor when changing membrane size on your system (see table below).

Note 1: Our 180 GPD (680 LPD) systems use two 90 GPD (340 LPD) elements.

 

Model GPD (LPD) Element Size
(Diameter X Length)		 Price Ship. Wt.
(lbs./kgs.)
QTY
  
MEM-S-0025 * 25 (95) 1.8" x 12" $69.99 1 / 0.45
MEM-S-0040
40 (151) 2" x 12" $79.99 1 / 0.45
MEM-S-0060 60 (226) 2" x 12" $89.99 1 / 0.45
MEM-S-0090 90 (340) 2" x 12" $99.99 1 / 0.45

* 15 GPD membranes have been replaced with 25 GPD and use the same flow restrictor (FR-25).

 

 

 

SpectraPure® Standard RO Membranes
SpectraPure® Standard Membranes are treated with a proprietary process to enhance the rejection & production rates and are QC batch tested to insure rated performance within manufacturer tolerances. These membranes are standard equipment in our SP, CHP, MPRO, MPDI RO/DI, and the MPDW Drinking Water Systems. All 25 to 90 GPD membranes will fit in our standard membrane housing. The Standard Membrane is also available as a replacement option for most competitors’ reverse osmosis systems.

  • Minimum Rejection = 96%. Stabilized Salt Rejection: 98%.
  • The membranes produce the rated GPD ± 20% at 60 psi. (Permeate flow and salt rejection based on the following test conditions: 250 ppm , 77°F (25°C), 15% recovery and the specified applied pressure).
  • Membranes must be matched with flow restrictors. Always change the flow restrictor when changing membrane size on your system (see table below).

Note 1: Our 180 GPD (680 LPD) systems use two 90 GPD (340 LPD) elements.

Note 2: The MEM-100-GRIP is the replacement for the ELIMINATOR and MARINE PRO series that has an "encapsulated membrane" . * MEM-100-GRIP has replaced our encapsulated membranes. Once you replace your encapsulated housing with this one, you will be able to exchange different size membranes, the next time you purchase. Please call if you have any questions.

Model GPD (LPD) Element Size
(Diameter X Length)		 Price Ship. Wt.
(lbs./kgs.)		 QTY  
MEM-0025 * 25 (95) 1.8" x 12" $59.99 1 / 0.45
MEM-0040 40 (151) 2" x 12" $69.99 1 / 0.45
MEM-0060 60 (226) 2" x 12" $79.99 1 / 0.45

MEM-0090 90 (340) 2" x 12" $89.99 1 / 0.45

MEM-100-GRIP
 100 (340) REPLACEMENT HOUSING AND 90 GPD MEMBRANE FOR ELIMINATORS $99.99 2 / 0.90

* 15 GPD membranes have been replaced with 25 GPD and use the same flow restrictor (FR-25).

 

Membrane Flow Restrictors for Line Pressure RO or RO/DI Systems
MODEL GPD RATED FOR SYSTEM PRICE SHIP. WT.
(lbs./kgs.)		 QTY  
FR-25 15-25 $4 0.5 / 0.23
FR-40 40 $4 0.5 / 0.23
FR-60 60 $4 0.5 / 0.23
FR-90 90 $4 0.5 / 0.23
FR-100 100 (FOR ELIMINATOR SERIES) $4 0.5 / 0.23
FR-180 180 $4 0.5 / 0.23

 

 

Please notify our webmaster of any problems you may have with this site