Delivery Pumps

Built-in demand pressure switch Automatically activated Self priming and can run dry 120 volts AC 50/60 Hz

SpectraPure® Delivery Pumps are used to transfer water from a storage tank to a remote location, such as an aquarium, hydroponics system, coffee-maker. The pump is controlled by a built-in pressure sensing demand switch. When a faucet or valve is opened downstream from the pump, the line pressure drops and the pump automatically starts. Conversely, when the valve closes, the line pressure will increase, turning off the pump automatically. The use of a bladder tank is recommended to prevent excessive cycling of the delivery pump.

MODEL	GPM Flow at 20 PSI	Price	Ship. Wt. (lbs./kgs.)	QTY
PUMP-DEL-5800-1	1.45	$167	6 / 2.8

Manual Operated Booster Pump Kits

Increases line pressure to any of SpectraPure® Line Pressure fed RO or DI Systems Add-on to existing RO, RO/DI Drinking Water Systems (DWS™) or Permeate Pump Drinking Water Systems (DWS-PP™) Boost incoming pressure by up to 60 psi for enhanced production and increased purity Operating pressure up to 100 psi Can be operated in any position

Self pressure regulating; maintains constant output pressure regardless of inlet pressure Whisper quiet Advanced diaphragm technology and improved bearings extend pump life and lower noise Sealed pump design protects from moisture and prolongs motor life Adjustable pressure output

SpectraPure® Booster Pump Kits are ideal for use on water sources with pressures below 40 psi (2.8 bar) such as private wells, gravity feed water systems and high rise apartments. Booster Pump Kits are available for manual use, automatic filling of reservoirs or sumps, and for use on RO Systems using pressurized holding tanks. The Manual Operated Booster Pump Kits can be used on RO or RO/DI Systems with existing Liquid Level Controllers, and the addition of a patch cord (BP-PATCH). Our pump kits include transformers for use on 115 volts AC/60 Hz, or 230 volts AC/50 Hz. The transformer for the 230 volts AC/50 Hz supply has a two pin European plug. Use low flow booster pump kits for systems up to 40 gpd, and high flow booster pump kits for systems up to 100 gpd. A pressure gauge is necessary to monitor the booster pump pressure. If your systems does not have a pressure gauge, please see the SpectraPure® Pressure Gauge Kit.

MODEL	Volts AC	Max. System GPD (LPD)	Price	Ship. Wt. (lbs./kgs.)	QTY
BPLF-MO-115	115	25 (95)	$168	8.5 / 3.9
BPLF-MO-230	230	25 (95)	$170	8.5 / 3.9
BPHF-MO-115	115	100 (378)	$199.99	11.5 / 5.2		OUT OF STOCK
BPHF-MO-230	230	100 (378)	$201.99	11.5 / 5.2		OUT OF STOCK