MAXCAP UPGRADE FOR 5 STAGE SYSTEMS

In many applications, the MaxCap DI ™ can be used as a “roughing” cartridge when installed up-stream of a Mixed-Bed or Hi-Silica removal cartridge. For example, if the RO water entering the Max Cap DI ™ has 25 ppm TDS (Total Dissolved Solids), the original DI cartridge may process about 200 gallons of pure DI water. By placing a MaxCap DI ™ cartridge in front of the original cartridge 600 gallons of water will pass through both cartridges before the Max Cap DI ™ is exhausted. The original DI cartridge will be only one-third exhausted. A second Max Cap DI ™ will process another 600 gallons and the original cartridge will now be two-thirds exhausted. Only after a third MaxCap DI™ cartridge processes another 600 gallons will the original cartridge finally become fully exhausted.

This example illustrates that three MaxCap DI ™ cartridges plus the original mixed-bed cartridge will process 1800 gallons of pure DI water. It would have taken nine original mixed-bed cartridges to produce the same amount of pure DI water.